Get closer to reality: simulate increasingly complex signal environments for radar, EW & antenna-test
Test sooner & increase confidence in EW systems by generating signal simulations when you need them: the UXG is a scalable threat simulator
Use pulse descriptor words (PDWs) to generate long pulse trains & individually control pulse characteristics
Accurately simulate multi-threat environments: 180-ns PDW update rate, chirps 10 to 25% of carrier frequency, pulses as narrow as 10 ns

What's included:

10 kHz frequency resolution
100 μs switching speed
Amplitude range of +10 to -10 dBm
Standard phase noise of -117 dBc/Hz (typ) at 20 kHz offset for a 10 GHz carrier frequency
3.5 mm (f) to 3.5 mm (f) connector adapter (20 GHz model only)
2.4 mm (f) to 2.4 mm (f) and 2.4 mm (f) to 2.9 mm (f) connector adapters (40 GHz model only)
Country-specific power cord
Documentation set (CD-ROM)
One day of on-site startup assistance

Frequency Options	20, 40 GHz
Output Power @1 GHz	-130 dBm to +10 dBm
Phase Noise @1 GHz (20 kHz offset)	-143 dBc/Hz
Frequency Switching	≤ 180 ns
Harmonics @1 GHz	< -50 dBc
IQ Modulation BW Internal/External	n/a
Non-Harmonics @1 GHz	< -70 dBc
Sweep Mode	List Streaming
Baseband Generator Mode	n/a
Software-General Purpose	AM, FM, PM Multifunction Generator Pulse Pulse Train Generator Chirp
Software-Cellular/Wireless Connectivity	n/a
Software-Audio/Video Broadcasting	n/a
Software-Detection/Positioning/Tracking/Navigation	Multi-Emitter Scenario Generation
Waveform Playback Memory	n/a
Frequency Modulation-Maximum Deviation @1 GHz	50 MHz to 128 MHz
Frequency Modulation-Rate @100 kHz Deviation	DC to 10 MHz
Phase Modulation-Maximum Deviation	37.6 radians
Phase Modulation-Maximum Deviation in High-BW Mode	n/a
Amplitude Modulation-Maximum Depth	80%
Amplitude Modulation-Rate	0 to 10 MHz
Applications Available	Yes

1A7	Calibration + Uncertainties + Guardbanding
1ED	Type-N (f) RF Output Connector
1EM	Move All Connectors to Rear Panel
520	Frequency Range, 10 MHz to 20 GHz
540	Frequency Range, 10 MHz to 40 GHz
A6J	ANSI Z540-1-1994 Calibration
AT2	Add Mechanical + Solid-State Attenuator Assembly
AXT	Hard transit case
CC1	100-Pin I/O Interface (for Binary Input)
CC2	50-Pin I/O Interface (for BCD Input)
CC3	10 Gigabit Ethernet I/O Interface
EP1	Enhanced Phase Noise
FR1	0.001 Hz Frequency Resolution
PM1	Pulse Modulation
SS1	1 µs Switching Speed
SS4	180 ns PDW Update Rate (Normal or List Mode) or 370ns Latency (fast CW mode)
SSD	Additional Removable Solid-State Drive
UK6	Commercial Calibration Certificate with Test Data
UNT	AM, FM, Phase Modulation, LF Output, and Narrowband Chirp
WC1	Wideband Chirp