Fluke 5520A High Performance Multi-product Calibrator
Description of Fluke 5520A Multi Product Calibrator
The Fluke 5520A builds on the 5500A's capabilities, extending its workload coverage even further. Its improved accuracy, expanded ranges, and capability to calibrate 5 1/2 and 6 1/2 digit multimeters can cover virtually all your high-performance workload, including: Handheld and bench meters (analog and digital) up to 6 1/2 digits . - Thermocouple and RTD thermometers
- Process calibrators
- Data loggers
- Strip and chart recorders
- Watt meters
- Power harmonics analyzers
- Current clamps and clamp meters
- Analog or digital handheld and bench oscilloscopes (with options)
- Panel meters
- Graphical multimeters
- Power meters, disturbance analyzers, power quality monitors, recorders and other power quality related equipment (with option)
Basic Capabilities - DC voltage range: 0 - 1100V
- DC current range: 0 - 11A
- Resistance range: 0 - 330 MOhm
- AC voltage range: 1.0mV - 1000V
- AC current range: 0.033mA - 11A
- Capacitance range: 0.33nf - 1.1mf.
Additional Features:
- Voltage DC Range: 0 to ±1020V
- Current DC Range: 0 to ±20.5A
- Resistance Range: 0 to 1100 MΩ
- Voltage AC Range: 1 mV to 1020V; 10 Hz to 500 kHz, Sine
- Current AC Range: 29 mA to 20.5A; 10 Hz to 30 kHz, Sine
- Capacitance Range: 0.19 nF to 110 mF
- Thermocouple Source and Measure Range: -250°C to +2316°C (11 types)
- RTD Source Range: -200°C to +630°C (8 types)
- DC Power Range: 10.9 mW to 20.5 kW
- AC Power Range: 10.9 mW to 20.5 kW; 45-65 Hz, PF=1
- Phase Range: 0 to ± 179.99°; 10 Hz to 30 kHz
- Frequency Range: 0.01 Hz to 2.0 MHz
- Power Consumption: 600 VA
General Specifications
- Warm up Time: Twice the time since last warmed up, to a maximum of 30 minutes
- Settling Time: Less than 5 seconds for all functions and ranges except as noted
- Standard Interfaces: IEEE-488 (GPIB), RS-232
- Safety: 12,200m (40,000 ft) maximum
- Analog Low Isolation: 20V
- EMC: Designed to comply with IEC 61326-1/1997
Temperature Performance
- Operating: 0°C to 50°C
- Calibration (tcal): 15°C to 35°C
- Storage: -20°C to 70°C
- Temperature Coefficient: Temperature coefficient for temperatures outside tcal ± 5°C is 10% of the 90-day specification (or 1-year, as applicable) per °C
Relative Humidity
- Operating: <80% to 30°C, <70% to 40°C, <40% to 50°C
- Storage: <95%, non-condensing
Altitude
- Operating: 3,050m (10,000 ft) maximum
- Non-operating: 12,200m (40,000 ft) maximum
Line Power
- Line Voltage (selectable): 100V, 120V, 220V, 240V
- Line Frequency: 47 to 63 Hz
- Line Voltage Variation: + 10% about line voltage setting
Dimensions
- Height: 17.8 cm (7 in), standard rack increment, plus 1.5 cm (0.6 in) for feet on bottom of unit
- Width: 43.2 cm (17 in), standard rack width
- Depth: 47.3 cm (18.6 in) overall
Applications
- Thermocouple and RTD thermometers
- Process calibrators
- Data loggers
- Strip and chart recorders
- Watt meters
- Power harmonics analyzers
- Current clamps and clamp meters
- Analog or digital handheld and bench oscilloscopes (with options)
- Panel meters
- Graphical multimeters Power meters, disturbance analyzers, power quality monitors, recorders and other power quality related equipment (with option)
The Fluke 5520A Multi-Product Calibrator sources direct voltage and current, alternating voltage and current with multiple waveforms and harmonics, two simultaneous voltage outputs or voltage and current to simulate DC and AC power with phase control, resistance, capacitance, thermocouples and RTDs.
The 5520A can also measure thermocouple temperature, humidity (with probe) and pressure using one of 28 Fluke 700 Series pressure modules.
The Fluke 5520A builds on the 5500A's capabilities, extending its workload coverage even further. Its improved accuracy, expanded ranges, and capability to calibrate 5-1/2 and 6-1/2 digit multimeters can cover virtually all your high-performance workload.
List of Options
| 06 | bit serial asynchronous interface (RS-232-C) |
| 1613006 | 3YR CAL & REPAIR |
| 525A/LEADS | THERMOCOUPLE AND TEST LEADS |
| 5500/CAL-L | LICENSE FOR MET/BASE SOFTWARE |
| CASE | 5500A/CASE - TRANSIT CASE |
| Coil | 50 Turn Coil |
| MET/BASE-6 | METROLOGY SOFTWARE, REQUIRES MET/CAL-L |
| MET/BASE-7 | MET BASE 7 SOFTWARE |
| MET/CAL-L | CAL SOFTWARE USER LICENSE |
| PQ | Power Quality Option |
| PQ/6 | POWER QUALITY AND 600MHZ SCOPE CAL OPTS |
| RAC3YR | REPAIR & ACCR CAL 3YRS |
| SC1100 | 1100 MHz Oscilloscope Calibrator |
| SC2 | CALIBRATION SERVICE FOR 2 YEARS |
| SC300 | 300 MHz Oscilloscope Calibrator |
| SC600 | 600 MHz Oscilloscope Calibrator |
| Z540X2 | 2 YRS CALIBRATION |
FAQ:
1.Can you ship order to Canada or Australia ?
Yes,we can .We send orders worldwide .
2. What delivery method do you use ? and delivery time ?
We can ship by EMS,DHL,FedEx,UPS,TNT with tracking number. Usual delivery time is 4-7 workdays.
3. What is your payment term?
100% T/T payment before shipment.
4. How can I ask any other question ?
You can contact us online or leave us messages below .
